Neck sterilizer

In some filling processes (most often with the hot filling principle), the contact of the packaging cap with the product is required to ensure the microbiological suitability of the product and the entire packaging (including the cap). This is achieved by turning the packaging so that the cap is completely soaked with the canned/bottled product (for a specific time). This achieves conservation of the cap and thus prevents possible re-infection of the product. For these purposes, our company offers the following solutions:

  • Vertical neck sterilizer.
  • Horizontal neck sterilizer.

In both variants, the packaging is rotated using two parallel chains with special grips that “grip” the packaging and turn it to a position where the entire cap is exposed to the canned/bottled product. The packaging is then turned back to its original position. Adjustable spacing between chains and adjustable heights of the input / output conveyor allow adjustment for different dimensions and types of packaging.

All neck sterilizers are adapted to the needs and requirements of the customer (required time of wetting the cap, orientation of the input / output belt,…). The robust base construction of the machine is distinguished by the sanitary design made out of stainless steel and profiles.It also features a protection layer made of acrylic window, which offers a view into the machine and access to key points for adjustment, cleaning and maintenance.  All installed components are of a  high quality and require a minimum level of maintenance. The machine is primarily equipped with an automatic lubrication system, which ensures optimal operation.

The operation of the machine is automatic (it’s also possible to automatically adjust the distance between the chains, for different formats). The machine is controlled via a panel located on the local electrical cabinet.

Complete solutions from A to Z.

Our workflow

WE WILL RECOGNIZE
YOUR WISHES
AND REQUIREMENTS
WE WILL PROPOSE
A SOLUTION AND
MANUFACTURE
THE EQUIPMENT
EQUIPMENT WILL
BE ASSEMBLED AND
PUT INTO COMMISSION
WE WILL OFFER YOU
COMPLETE AFTERSALES
SERVICE AND SUPPORT

Do you have a question, you want to know more? Contact us and we will be happy to help you!
You can reach us quickly and easily by the contact form below, or give us a direct call at: +386 3 818 31 00

    I agree to keep and use the personal data provided to inform me from time to time via e-mail or telephone about:



    We will use your information solely for the purpose for which we obtained your consent. We will use your personal information confidentially and will not pass it on to third parties. We treat your privacy in accordance with the provisions of the GDPR and the Personal Data Protection Act.


    You can unsubscribe from receiving messages at any time by sending a message to an email address: sales@petek.si entitled Unsubscribe. After processing the cancellation request, PETEKPROCES d.o.o. stopped sending content you unsubscribed from. Details on deregistration, processing and protection of personal data can be found on the page Legal notices.